Vivo Y28 5G (PD2318) ISP Pinout

Product Description

Vivo Y28 5G (PD2318) ISP Pinout – Detailed Explanation

The image shows the ISP (In-System Programming) test points located on the motherboard of Vivo Y28 5G (Model: PD2318).
These ISP points are used by mobile repair technicians to directly communicate with the device storage chip when normal boot or USB connection is not possible.

ISP method is commonly applied for UFS-level servicing without removing the storage IC.

Purpose of ISP Pinout

The ISP pinout is mainly used for:

UFS data read / write

Boot repair (no power, stuck logo, dead phone)

Firmware corruption recovery

Backup and restore of partitions

Security repair (tool-based, legal use)

FRP erase only with proper authorization

ISP Pinout Labels Explained (As Shown in Image)

The image highlights four important differential signal lines used for UFS communication:

🔹 RXOP (Receive Data Positive)

Positive receive data line

Used to read high-speed data from UFS storage

Works together with RXON

🔹 RXON (Receive Data Negative)

Negative pair of RXOP

Completes the receive differential lane

Required for stable data reading

🔹 TXOP (Transmit Data Positive)

Positive transmit data line

Sends commands and data from programmer to UFS chip

Essential for writing and flashing operations

🔹 TXON (Transmit Data Negative)

Negative pair of TXOP

Ensures signal balance and data stability during write process

👉 RXOP + RXON = Receive Lane
👉 TXOP + TXON = Transmit Lane

Together, these four points form one full high-speed UFS differential lane (HS-Gear).

Typical Use Cases

Using this ISP pinout, technicians can perform:

Full UFS dump

Partition read/write

Repair corrupted system or boot partitions

Fix dead / no-boot Vivo Y28 5G devices

Backup critical data before flashing

FRP removal only through authorized tools and customer verification

Important Technician Notes ⚠️

Use fine jumper wire and low-heat soldering

Do not short RX and TX lines

Always connect proper GND reference

Wrong connection may permanently damage UFS or CPU

ISP is a professional-level repair method

Legal & Security Notice

ISP access must be used only for lawful servicing:

Device owner permission required

FRP removal must follow brand and local regulations

Unauthorized data access is strictly prohibited

This guide is shared for educational and professional repair purposes only.



Vivo Y28 5G ISP Pinout

Vivo PD2318 UFS ISP

RXOP RXON TXOP TXON pinout

Vivo UFS repair method

Dead boot repair Vivo Y28